JIA-912Sinformation      
Drop Impact tester
This testing machine uses the air pressure type gripper and certain load capacity to attach on the test sample. The test sample loosens and falls to the impact face when from highly free dropping, and observes its damage situation.

JIA-912Sinformation    Animation   
Drop Impact tester
This testing machine uses the air pressure type gripper and certain load capacity to attach on the test sample. The test sample loosens and falls to the impact face when from highly free dropping, and observes its damage situation.

JIA-923Binformation      
UV Test Chamber
The tester is simulation environment in the sunlight radiation, The experimental cause test sample discoloration, supplies reference for chemical control in the regulation system.
Light Source UV tube
Wavelength
UVA：340 nm，20 W
UVB：313 nm，20 W
UVC：253.7 nm，15 W(select)

JIA-517Cinformation      
Static Friction Tester (on-line)
The tester is for plastics membrane, paper…etc to test friction and factor.
It can depend to make on your requirement to make.
Selects and purchases for on-line system.

JIA-806B2Pinformation      
COMPUTER SYSTEM TENSILE TESTER
The machine conforms to the kinesiology to control with computer system and on table design. Provides the ball bearing screw rod, the precise slide rod and the servomotor, enhances effectively fine and reduces the noise. With rubber meter of two-dot elongation, calculate the extending amount of material and cOptional type：Windows XP
※Chinese & English
※Test report
※Unit change
※Form planning
※Display data & graph
※Choice unit can make kind of graphs. The maximum value, the breakage value, the yield point, yield strength, the Young’s modulus, the elongation ratio and mean value.
oefficient of elongation accurately

JIA-205information      
BURSTING STRENGTH TESTER
This machine is used for determining the bursting strength of paper and corrugated board.

Sensing method:Pressure gauge
Capacity:20,50,100㎏/㎝2(equipped with two of them)
Hydraulic speed:170±20㏄/min

JIA-205Ainformation      
DIGITAL BURSTING STRENGTH TESTER
ASTM-D2210
This machine is used for determining the bursting strength of paper and corrugated board.

Sensing method:Pressure gauge
Capacity:20,50,100㎏/㎝2(equipped with two of them)
Hydraulic speed:170±20㏄/min

JIA-517information      
TENSILE TESTER
This machine is uses in the model of cellophane, packing industry, paper, tin foil, and so on. The material determination friction force, the friction coefficient of the tube instrument.

Induction Way: Electronic Pull Gauge LCD Crystal display

Capacity: 5Kg Smallest indicate 0.001Kg

JIA-603information      
FREEZING TESTER
Specially test cold-endurance of materials or products to ensure its low temperature properties

Temp. range: -30～100℃，-50～100℃ -70～100℃ (optional)
Temp. accuracy: ±0.5℃
Interior: 40X40X50 cm（M） 50X50X60 cm（L） (optional

JIA-606information      
QUV ACCELERATED WEATHERING TESTER ASTM、ISO
This tester reproduce the damage caused by sunlight, rain and dew in order to get specimen's weathering durability.

Temp. range:UV temp.40～90℃ condensation temp.40～60℃Lamp Q'ty:Ultraviolet lampX8,sparesX4Water: tap 8 liters/day