【PageUp】| 1 | 2 | {3} | 4 | 5 | 6 | 7 【PageDown】
|
|
JIA-908Cinformation
LASER CUTTER
The cutter is produced by laser high-technology with precise accuracy.
Cut accuracy:±0.1mm Thickness of blade:0.7mm Applicable material:rubber, plastic, leather, paper......etc.
top
|
|
JIA-908Hinformation
HARDNESS PLASTIC SPECIMEN CUTTING MACHINE
It's used to finish the hard plastic materials into the standard dumbbell specimens for tensile and elongation tests.
Rotation speed:1800rpm Specimen mold:1 set
top
|
|
JIA-APS1000information
AUTO-PNEUMATIC CUTTER PRESS
It's actuated by pneumatic source to take the various specimen for testing.
Capacity:1000Kgf Required air:6Kg/cm2 Work desk of Max high:320mm Test area:250X250mm
top
|
|
JIA-909information
MANUAL MOLDING TEST PRESS
GB-6038 It's operated by manual and for preparing test specimen from raw material.
Pressure source: jack Capacity:10,30,50ton (optinal) Temp.:room temp.~300℃ Electronic timer:999hr-min-sec
top
|
|
JIA-909Ainformation
HYDRAUIC MOLDING TEST PRESS
This machine is actuated by motonized hydraulic system and for preparing test specimen from raw materials.
Pressure source:oil pressure system Capacity:10,30,50ton (optinal) Temp.:room temp.~300℃ Electronic timer:999hr-min-sec
top
|
|
JIA-910information
SAFETY SHOES IMPACT TESTER
CNS-6863 Put the safety shoe under the impact site, check the damage and or warp of it after hit by hammer from specified height.
Hammer weight:20㎏ Angle of hammer knife edge:90°R3㎜ Drop height:120、300、450㎜
top
|
|
JIA-911Ainformation
FOAM RUBBER HARDNESS TESTER
JIS-K6382 Compress the specimen to 25% of the original thickness for 20sec and divide the load by specimen's area to get its compression hardness.
Specimen:50X50X25㎜ (WXDXH) Capactity:100Kg Resolution:1/10000 Compressing distance:¯200,with hole (¯6, pitch 19㎜)
top
|
|
JIA-911Binformation
FOAM RUBBER HARDNESS TESTER
JIS-K6382 Compress the specimen to 25% of the original thickness for 20sec and divide the load by specimen's area to get its compression hardness.
Specimen:50X50X25㎜ (WXDXH) Capacity:30Kg Compressing distance:0.01~20㎜or optional Compressing distance:¯200,with hole (¯6, pitch 19㎜)
top
|
|
JIA-911Cinformation
FOAM RUBBER RECIPROCATING COMPRESSION TESTER
Compress the specimen(foam material) to measure its permanent deformanent ratio.
Specimen:50X50X20㎜ (WXDXH) Compressing speed:60cpm Compressing distance:10~100㎜ ( adjustable ) Counter:6 figures LCD
top
|
|
JIA-912information
Animation
DROUP BALL IMPACT TESTER
JIS-K6745 The striker with a definite weight drop freely from specified height to strike specimen for judging its quality.
Drop height :2M or specified Control method of drop ball:By soienoid (VDC) Weight of steel ball:112,198,225,357 533,1041,2280g (optional
top
|