【PageUp】| 1 | 2 | 3 | {4} | 5 | 6 | 7 【PageDown】
|
|
JIA-913Ainformation
IMPACT RESILIENCE TESTER
JIS-K6301 To test the bouncing resilience of vulcanized rubber.
Specimen: ¯28.68~29㎜,T12.7㎜ Scale's horieontal length:L625,R2000㎜Scale's vertical height:100㎜(in vertical site)Drop height:100㎜(vertical)Iron Bar:¯12.7㎜,L356㎜,R6.35㎜, weight350g
top
|
|
JIA-913Binformation
Animation
RESILIOMETER ASTM-D2632
ASTM-D2632 TThis machine is to test the resilience of rubber by vertical rebound
Drop height:400mm Plunger weight:28g Specimen thickness:12.5mm
top
|
|
JIA-914A IZOADinformation
IMPACT TESTER
IMPACT TESTER ISO-180 Measure the amount of energy Measure the amount of energy absorbed by rigid plastic after impacted at a certain angle by specified weight to judge its toughness.
Capacity:30,50,150Kg-cm (optional) Impact speed :3.4 m/s Test angle:150°
top
|
|
JIA-914B information
Animation
IMPACT TESTER
ISO-180 Measure the amount of energy absorbed by rigid plastic after impacted at a certain angle by specified weight to judge its toughness.
Capacity:30,50,150Kg-cm (optional) Impact speed :3.4 m/s Test angle:150°
top
|
|
JIA-914C information
PENDULUM IMPACT TESTER
Capacity:10Kg (optional)
Test angle:6 ° 11 ° 20 °
top
|
|
JIA-914Finformation
IMethod of Test for Floor Slippriness (Pendulun Type)
Capacity:3.8 (optional) Impact speed :2.5 m/s Test angle 70°
top
|
|
JIA-915information
COMPRESSION AND DEFORMATION TESTER
ASTM-D395 Specially test rubber in static compression under a certain temperature&time period.
Compressing ratio:40﹪、30﹪、25﹪、20﹪ Supporter thickness:7.62、8.89、9.52、10.16㎜
top
|
|
JIA-916information
DUPON IMPACT TESTER
K5400 Put the coated specimen under the impact site, check the damage and or warp of it after hit by hammer from specified height.
Drop height:50~500㎜Interval 50㎜ Hammer:300、500、1000g Impact head radius:1/2",1/4",3/16",1/8",1/16"
top
|
|
JIA-917information
ELECTRIC FURINACE
Be used in material's heat treatment, resolution, reaction of high temperature and ash analysis.
Interior:10X20X10㎝ 15X30X10㎝ 20X40X15㎝ (optinal) Temp. range:400~1100℃
top
|
|
JIA-918information
DRYING OVEN
Dry, bake and preheat various materials or specimen. By means of hot-air circulation, heat and temp. distribution are unform.
Model:S、M、L Interior:30X30X35、40X40X45 50X50X60㎝ (optional) Temp.:room temp.~200℃OR 300℃
top
|