【PageUp】| 1 | 2 | 3 | 4 | {5} | 6 | 7 【PageDown】
|
|
JIA-919information
AKRON ABEASION TESTER
BS-903 It "s applicable for testing the abrasive consumption of rubber products as sole, tire......etc.
Grinding wheel: grain size40# Specimen slanted range: 0~45° Specimen rotating speed:85±5rpm Load:2、6LB
top
|
|
JIA-919D DINinformation
DIN TYPE ABRASION TESTER
DIN-53156 This tester is used to evalute the resistance of rubbers or other elastomers during frictionand wearing.
Load:2.5~12.5N,5~15N,7.5~17.5N 10~20N Drum dia:150㎜ Drum rotation:40rpmGrip displacement:4.2㎜/per drum revolution
top
|
|
JIA-919Ninformation
NBS RUBBER ABRASION TESTER
ASTM-D1630 Load the specimen to abroad it with the griding paper on a rotating roller to check its consumption.
Rotation speed:45±5rpm Load:2265g 3pcs Drum Dia: ¯150mm Counter: 6 figures LCD
top
|
|
JIA-920information
ROSS FLEXING TESTER
ASTM-D1052 Specially test the flexibity endurance of rubber, sole, PU......etc.
Grips:6set (12 pcs of specimens) Flexing angle:MAX90° Test speed:100±5rpm Counter: 6 figures LCD
top
|
|
JIA-921information
DEMATTIA FLEX CRACKING TESTER
ASTM-D813 It observes the cracking endurance of spacimens i.e. rubber, leather, EVA, sole......etc. until flexibity fatigued.
Specimen:140~155LX20~25wX6T㎜ Grip space:19~75or65~90㎜ Test speed:300±10cpm Conuter:6 figures LCD
top
|
|
JIA-922information
SHOES FLEXING TESTER
SHOES FLEXING TESTER The tester is used for testing the bending durability of shoes to improve its quality.
Test speed: 100cpm Flexing angle: 0~90° (adjustable) Counter:6 figures LCD
top
|
|
JIA-923Ainformation
UV TEST CHAMBER
Simulate the circumstances of sunshine radiation in chamber to test the resistance to discoloration of shoe materials.
Light source:sunlamp Specimen pan:¯45㎝(revolving type) Rotation speed: 0~40rpm(adjustable) Test space:150~250㎜(adjustable) Light irradiance: adjustable Timer:0~999hr Max Temp.:200℃
top
|
|
JIA-923Binformation
AUV TEST CHAMBER
ASTM-D1148 Simulate the circumstances of sunshineradiation in chamberto test the resistance to discolorationof shoe materials.
Light source:lamp tube Specimen pan:repose Test space:150,250㎜ (fixed) Timer: 24hr
top
|
|
JIA-924Ainformation
CROCK METER (MOTOR TYPE)
To test dyed textile, decolored extent of leather after abrasion. First, coated abrasive hammer with dry or wet white cotton cloth, then abrade repeatedly to specimen clamped on testing table for ten times within 10 seconds thus can appraise grade of color-dying firmness.
top
|
|
JIA-924Binformation
CROCK METER (MANUAL TYPE)
To test dyed textile, decolored extent of leather after abrasion. First, coated abrasive hammer with dry or wet white cotton cloth, then abrade repeatedly to specimen clamped on testing table for ten times within 10 seconds thus can appraise grade of color-dying firmness.
Load:900g Rubbing speed:Manual type Rubbing space:100㎜ Rubbing hammer diameter:¯16㎜Battery timer:8 figures
top
|