|
|
|
|
|
TEXTIES
AND DYEING TESTING MACHINES
1
2
UP |
 |
JIA-720 information
DYENG RUBBING TESTER
JIS-L0801
Coat surface of abrasive hammer of the tester with dry
wet white cotton cloth then abrade colored specimen
with the certain load and fixed times to evalute it's
grade of colordyeing abrasive firmness.
Rubbing speed:30cpm
load:200，500g
Rubbing space:100㎜
Counting method:
|
 |
JIA-721information
CONDITIONING OVEN
CNS-1479
The weight can be weighed when proceed to dry
specimen. The observing window and illumination light
of the oven can observe whole testing conding.
Micro-adjusting patent level, operate easily,
fastweight.
Temp.:room temp.∼200°
Balance:0.01∼310g
Interior:35x30x35㎝
|
 |
JIA-722information
LAUNDER TESTER
JIS-L0821
To put specimen of dying articles, testing liquid
steel ball into testing cup, running according to
specimen washing firmness, the test of wash endurance
of organic solvent can be executed either.
Temp.:room temp.∼100°
Rotating speed:42±2RPM
Test cup:o80㎜XH120㎜（450㏄）
Steel Ball:O6.4㎜
Soap liquid;5g/l
Timer:0∼60min
|
 |
JIA-724information
SAMPLE CUTTER
Place fabric onto the cutting mat, press down hand
wheel, rotate over 90 degrees under pressure, and you
are got an accurate 100㎝2 sample for balance.
Cutting area:100㎝2
Blades:4PCS（usable 2 ends）
Cutting mat:270X195X20㎜ 1PCS
|
|
|
JIA-730information
MACE
SNAG
TESTING
MACHINE
is
used by testing method for snag of woven fabrics and
knitted fabrics. It makes use of mace on rotary
correct testing for a long time. And observe the
situation of sphere’s amounts to distinguish the
knitted fabrics’ level.
Hp:25W×2
SPEED：60
rpm
POWER:AC1
∮110V
50/60HZ）
50W×41.5D×50H
weight:40kg
|
|
|
|
 |
JIA-924Binformation
CROCK METER
（MANUAL TYPE）
ASTM-D2054-63
To test dyed textile, decolored extent of leather
after abrasion. First, coated abrasive hammer with dry
or wet white cotton cloth, then abrade repeatedly to
specimen clamped on testing table for ten times within
10 seconds thus can appraise grade of color-dying
firmness.
Load:900g
Rubbing speed:Manual type
Rubbing space:100㎜
Rubbing hammer
diameter:‾16㎜Battery
timer:8 figures
|
|
|
JIA-926MPinformation
Suction
Aqueous Tester
This
machine use in the experimental hygroscopicity fabric, the
toilet paper class and so on, the latitude to respectively takes
20x2.5 ㎝,
after enters in the water (The bottom of the
specimen contact with water surface) 10 minutes later, read the
height of the specimen that is absoring with water ( ㎜)
W340XH400XD210
SIZE 0∼200㎜
|
|
|
JIA-926PWinformation
Water Bath Tester
specimen in warm water, then observe whether specimen surface had a blister, faded, swell……etc.degenerative condition to judge its quality and calculate
the change rate of weight before/after test.
700X580X540㎜
(WXHXD)
AC3
ψ220/50Hz
|
 |
JIA-8084information
JIA-8084
COLOR CHANGE
JIA-8085
COLOR STAIN
JIA-0806
Chromatic Transfer Scale, step Nine
GREY SCALE
ISO-R105/1
Contrast and judge the specimen's
color-faded or contarminative condition after the
firmness of dyeing test. Grade:5、4∼5、4、3∼4、3、2
|
 |
JIA-CTinformation
MULTI-LIGHT COLOR COMPARISON
LABINET
JIS-Z8724
It's specially designed to supply standard＆objective
light source for precisely quality control in contrast
of materials and color of products.
Interior:67X56X35㎝WXDXH
Light kinds:D65(Artifical daylight D65, 6500°k)A(Standard
light type A, 2800°k)F (Hight energy Fluorescent
light TL84, 4000°k)UV (Ultra-violet light, long wave���n�n
|
 |
JIA-724-1information
WATER VAPOR TRANSMISSION CUPS
Water Vapor Transmission Cups assirted Water Vapor
Permeable Tester is used for fabrics, of sportswear、
golf-appare, ......etc. and widely for multi-purpose
shelter-apparel. Model:Water cup，Chlor-Calcium
cup...... Interior:
Water cup O63X50L
Chlor-Calcium cup O60X25L
|
|
|
|
 |
JIA-605S-Winformation
TEMPERATURE ＆ HUMIDITY
TESTER
Water Vapor Permeable Tester
This Water Vapor Permeable Tester is used for fabrics,
of sportswear 、raincoat- cloth Ski-apparel、golf -
apparel、chemistry、inclemency-smock etc. , and
widely for multi-purpose shelter - apparel. This
appliance, in box conservation condition temperature
& humidity, and control in box wind velocity（3.3∼5.0m/sec）
, assorted Water Vapor Transmission Cups（Chloride-Calcium
cup JIS-L-1099、Water cup ASTM-E96 criterion）
Temp Range:-10∼100℃（150℃）
Up/Down Speed: 30/40min
Humidity Range: 20﹪∼98﹪
wind velocity: 3.3∼5.0 m/sec （Adjustable）
|
 |
JIA-CS-22Cinformation
UNIVERSAL WEAR TESTER
ASTM-3886
It "s a multifunction and precisioninstrument to
measure the abrasion resistance for the surface, bend
and edge of paper, plastic, rubber ......etc.
Tension weight:2∼1/2LB,2∼1LB,1∼2LB
Head weight:2∼1/2LB,2∼1LB
Table stroke: approx.1"
Reciprocal speed:120cpm
Compression:1∼9PSI
|
|
|
JIA-BF-T20information
Circulating
Water Bath
495*295*150㎜
(WXHXD)
TEMP
LED顯示
TEMP
CONTROL BY PID
POWER 110/220V
50/60Hz
|
|
|
1
2
UP |
|
|
|
|
