JIA-205information

BURSTING STRENGTH TESTER ASTM-D2210
This machine is used for determining the bursting strength of paper and corrugated board.

Sensing method:Pressure gauge
Capacity:20,50,100㎏/㎝2(equipped with two of them)
Hydraulic speed:170±20㏄/min

JIA-205Ainformation

DIGITAL BURSTING STRENGTH TESTER ASTM-D2210
This machine is used for determining the bursting strength of paper and corrugated board.

Sensing method:Pressure transducer
Capacity:0∼100㎏/㎝²  0∼16 ㎏/㎝² (optional)

JIA-517information

Friction Tester

This machine is uses in the model of cellophane,  packing industry,  paper,  tin foil, and so on. The material determination friction force, the friction coefficient of the tube instrument.

Induction Way: Electronic Pull Gauge LCD Crystal display

Capacity: 5Kg  Smallest indicate 0.001Kg

JIA-603information

FREEZING TESTER
SSpecially test cold-endurance of materials or products to ensure its low temperature properties

Temp. range: -30∼100℃，-50∼100℃ -70∼100℃ (optional)
Temp. accuracy: ±0.5℃Interior: 40X40X50 cm（M） 50X50X60 cm（L） (optional)

JIA-606information

QUV ACCELERATED WEATHERING TESTER ASTM、ISO
This tester reproduce the damage caused by sunlight, rain and dew in order to get specimen's weathering durability.

Temp. range:UV temp.40∼90℃ condensation temp.40∼60℃Lamp Q'ty:Ultraviolet lampX8,sparesX4Water: tap 8 liters/day

JIA-CS-22Cinformation

UNIVERSAL WEAR TESTER ASTM-3886
It "s a multifunction and precisioninstrument to measure the abrasion resistance for the surface, bend and edge of paper, plastic, rubber ......etc.

Tension weight:2∼1/2LB,2∼1LB,1∼2LB
Head weight:2∼1/2LB,2∼1LB
Table stroke: approx.1"Reciprocal speed:120cpmCompression:1~9PSI

JIA-718information

PERSPIRATION TESTER JIS-L-0822
Completely and averagely sock specimen into acid and alkaline artificial sweat liqurd for 30 minutess, press it by this tester at the specified time and temp. to evaluate the grade of perspiration-endurance against comparision of grey scale mark.

Specimen:A6X6㎝、B10X4㎝、AATCC5.7X5.7㎝
Load:CNS4.5㎏
Acrylic plate:115LX63WX3T㎜

JIA-718Ainformation

PERSPIRATION TESTER AATCC-RR52
Completely and averagely sock specimen into acid and alkaline artificial sweat liqurd for 30 minutess, press it by this tester at the specified time and temp. to evaluate the grade of perspiration-endurance against comparision of grey scale mark.

Specimen:A6X6㎝、B10X4㎝、AATCC5.7X5.7㎝
Load:CNS4.5㎏
Acrylic plate:115LX63WX3T㎜

JIA-719Ainformation

HYDROSTATIC HEAD TESTER DIN-53-886
It's used for determination of the resistance of waterproof cloth, fabric, synthetic, leather and leather to water penetration.

Pressure:0∼4㎏/㎝2（40000㎜ Aq）
Test area:100㎝
2Speed:adjustable
Equipped with:air compressors

JIA-720information

DYENG RUBBING TESTER ASTM-D2054-63
Coat surface of abrasive hammer of the tester with dry wet white cotton cloth then abrade colored specimen with the certain load and fixed times to evalute it's grade of colordyeing abrasive firmness.

Rubbing speed:30cpm
load:200，500g
Rubbing space:100㎜Counting method

JIA-905information

BALLY LEATHERS FLEXING TESTER JIS-K6545
This device is suitable to test thin leather products for vamp, dress cloth and bags.

Specimen:70X45㎜ 6set or12set (adjustable)
Flexing angle:22.5°Flexing
speed:100cpm
Counter:6 figures LCD

°

JIA-906Ainformation

MAESER WATER PENETRATION TESTER ASTM-D2099
Test shoe upper material of leather synthetic leather, cloth ......etc. against water penetration, which is taken the specimen immersing in water and flexing by a constant speed.

Load:steels balls ‾1/8"，weight135±5g
Stroke:1"（About 29°）
Test speed: 90cpm
Counter:6 figures LCD

JIA-906Dinformation

BALLY PENETRATION TESTER DIN-53338
Test shoe upper material of leather, synthetic leather, cloth.....etc. against water penetration, which is taken the specimen immersing in water and flexing by a constant speed.

Load:steels balls ‾1/8"，weight135±5g
Stroke:2，3，4，6㎜ (settable)
Test speed: 90cpm: 60cpm
Counter:6 figures LCD

JIA-907information

SAMPLE BUFFING MACHINE JIS-K6301
TThis machine will be able to grind the surface of the material and take the necessary thickness of materials for testing.

Griding wheel:30#，‾6"
Speed:50HZ∼1420rpm 60HZ∼1720rpm

JIA-908information

CUTTER PRESS ASTM-K6301
For taking specimen of rubber.

Cut method:Downward type

JIA-908Cinformation

LASER CUTTER
The cutter is produced by laser high-technology with precise accuracy.

Cut accuracy:±0.1mm
Thickness of blade:0.7mm
Applicable material:rubber, plastic, leather, paper......etc.

JIA-908Hinformation

HARDNESS PLASTIC SPECIMEN CUTTING MACHINE
It's used to finish the hard plastic materials into the standard dumbbell specimens for tensile and elongation tests.

Rotation speed:1800rpm
Specimen mold:1 set