1 2 　NEXT 

JIA-516Binformation

ADHESION-TEARING STRENGTH TESTER
This machine can test the adhesive firce of copperfoil circuit on the pc board and the density of object surface which tinfoil leadfoil, tape......etc.are adhered.

Capacity:2∼50㎏（B Force gauge）(A LED display）
Resolution:1/200（LED display 1/10000）
Test speed:10∼100㎜ (afjustable)
Peeling angle:90°

JIA-611Ainformation

VIBRATION TESTER
This machine is specially designed to test the vibration-resistance of finished products or components of electron, electric appliance......etc.

Virbrating direction:up/down, left/right
Virbrating speed: 10∼60HZ
Amplitude:0∼4㎜( adjustable)
Counter:999 min, 2set
Direction:up/down then left/right)

JIA-611Binformation

VIBRATION TESTER
This machine is specially designed to test the vibration-resistance of finished products or components of electron, electric appliance......etc.

Virbrating direction:up/down or left/right （optional）
Virbrating speed: 10∼60HZ
Amplitude:0∼4㎜( adjustable)
Counter:999 min, 1set

JIA-611Cinformation

VIBRATION TESTER
This machine is specially designed to test the vibration-resistance of finished products or components of electron, electric appliance......etc.

Virbrating direction:up/down or left/right
Virbrating speed: 23HZ（1400cpm）
Amplitude:0∼4㎜( adjustable)
Counter:999 min, 1set

JIA-612information

BRITTLENESS TEMPERATURE TESTER
ASTM-D746
The test specimens are mounted to a Cantilever grips and immearsed in a Low temp. then strike specimen with the tipe of hammers to detect whether it has fracture or not.

Temp. range:0∼-80℃
Impacter 's radius:1.57㎜
Specimen:Plastic 38X6X2㎜ Rubber 32X6X2㎜

JIA-613information

DIELECTRIC WITHSTANDING TESTER JIS-C-3004
This tester is to test the damaged extent of conductor or various materials of insulator caused by the voltage endurance.

Capacity:10KVA、5KVA、0.5KVA (optional)
Output voltage:(10KVA)AC 10KV,20KV， (5KVA)AC 7.5KV,15KV (0.5KVA)AC 0.5KV,10KV (optional

JIA-614information

CORD FLEXIBILITY TESTER JIS-C-3004
This machine is to test the degree of the damage, and cracking after cables and wires are testing to decide their quality.

Rotating speed:20rpm
Power:1/3HP

JIA-615information

PLUG BENDING TESTER
UL-817、CNS-6797
Specially test the life of extended wire of plug, when specimen is bended and circuit breaking happened, electric current cource can't supply, the operation will auto-matically cease.

Specimen:6 set
Flexing angle:30、45、60、90° (adjustable)
Flexing speed:10∼60cpm (adjustable)
Load:100、200、300、500g, each 6sets
Count:7 sets (separatory 6 sets)

JIA-616information

DIELECTRIC & INSULATION TESTER
It performs the test of withstanding voltage of various electric materials or measures its insulator's resistance.

Capacity:AC2.5/5KV
Applied voltage:DC500V
Impedance:0∼500MΩ
Cutoff current:0.5、1、3、5、10mA( 5 steps)
Counter:0∼60sec

JIA-617information

PARALLEL PLATE PLASTOMETER
JIS-C-3005 UL-1581
It's used to test the deformation rate of specimen under a specified load and temperature.

Model:A 1 set、B 3
setsLoad:50，100，250，500，1000g
Temp.:natural∼200℃
Microgauge:0.01∼30㎜

JIA-618Binformation

MANUAL TYPE CORD TORSION TESTER
CNS-657
This is to test torsional strength of the conductor or copper, lead, aluminum......etc.

Model :manual type
Grip space:0∼200㎜
Counter :machine 6 figures

JIA-618Ainformation

MOTOR TYPE CORD TORSION TESTER
CNS-657
It's specially designed to test the strength of torsional rupture of metal wire and torsion endurance of varnish film of enameled wire.

Grips space:0∼500㎜
Rotating speed:0∼60rpm
Counter:electronic
type 6 digits

JIA-618A1information
CNS-6139, 657, 1111, 8938

Wire Torsion Tester

It's specially designed to test the strength of torsional rupture of metal wire and torsion endurance of varnish film of enameled wire.

Grips space:0∼500㎜
Rotating speed:0∼60rpm
Counter:electronic
type 6 digits

JIA-619information

PACKAGE DROP TESTER
This machine is designed specially for testing the damage packaged, all the rhombohe-dron, angle, face of the package container can be tested.

Height range:50∼150㎝
Test space:W85XD120XH40∼150㎝
Height adjustment:motor driven

JIA-620Ainformation

HORIZONTAL VERTICAL FLAME TESTER
UL-62
This machine is to perform fire-profecting of insulator or sheathing. Model: veritical type, horizontal type

Timer:2 sets 0∼99 sec
Length of specimen:300，457㎜
Counter:0∼9999 Times

JIA-621information

CORD WINDING CRACK TESTER
JIS-C3005
The specimen is put inside chamber to perform the rolling test under the specified freezing condition for checking its crack or fissure.

Temp. range :room temp.∼-50℃
Dimension:40X40X50㎝
Rod:4 rods, 1.5∼2 times the thickness of specimen

JIA-622information

CORD ABRASION TESTER
JIS-C-3004
This machine is to test the abrasion after received turning and pressure from this machine for a period of time of grinding so as to find out damage of cover and inner conductor.

Rotating speed:60rpm
Load:5、6、6㎏
Grinding wheel:O35㎝、＃36