1 2 　UP 

JIA-623information

PLUG ABRUPT PULL TESTER UL-817
This machine is specialized in testing aprupt/rotary pull strength between the blades and conductors, it can also execute the current test indspendently.

Specimen:6 set
Abrupt pull weight:2.5LBX6 "or10"
impact speed:10cpm
Rotating weight:3LBX6 360°
Load weight:15LBX6
Load current:40A/0∼12V
Timter:0∼3 min
Counter:6 figures

JIA-624information

PLUG STATIC PULL TESTER UL-817
This machine is suitable to test load strength test of the blades, terminals and insulator of power-suppy cords.

Table speed:530±5㎜/min
Load:(5lb、10lb、15lb)x6
Timer:6 figures (H.M.S adjustable)
Test volume：6 PCS

JIA-625information

SPARK TESTER
UL-62
Apply certain voltage between conductor and electrode for a certain time to test the endurance ability of that valtage, in the meantime, the circuit indicates position of pin hole and counts its number.

Capacity:300VA，500VA (optional)
Electric length:600㎜

㎜

JIA-636information

SURFACE MARKING TESTER
UL-1581、1690
It's professional in testing detect the durability of printing on the cord, cable and wire.

Rubbing hamerweight:450±5g
Rubbing speed:10cpm
Rubbing:100㎜
Counter:electronic type 6 digits

JIA-927Binformation

PLUG BALL PRESSURE TESTER
IEC-884-1
It's used for measuring the heat-endurance and pressure resistance of the cord, place specimen in the chamber at 100℃ under a specified load to check its depth of concavity, it will be qualified, if the depth is within 2㎜.

Temp. range:room temp.∼200℃
Pressed weight:20N
Radius of ball end:R2.5㎜
Dimension:40X40X45㎝

JIA-927Uinformation

CONVECTION AND VENTILATION AGING OVEN
UL-746B
This tester is designed to test rubber ＆ plastic specimens of cord''s inslator ＆ jacket.The tensile strength, elongation and hardness of dumbbell specimens before/after aging can be compared.

Interior:60X60X60㎝
Air-change rate:1∼200times/hr (adjustable)
Temp.range:room temp.∼300℃
Specimen's rotary disk:three layers, three circles per layer

JIA-927Winformation

PLUG CONSTANT TEMPERATURE HOISTING TESTER
UL-817
This machine test the displacement speed of the blades of cord which is placed into the chamber at a constant temp. and with a specified load.

Temp. range:room temp.∼200℃
Load:10LBX12
interior:50X50X60㎝
Timer:0∼6hr

JIA-929information

OIL BATH TESTER
GB-1690
Specially test the heat-endurance oiliness of rubber products such as oil seal, oil-protection coil.

Temp. range:room temp.∼300℃
Test cup:‾38X300㎜X6 sets
Test bath:20x20x30㎝
Mixing motor40W

JIA-804information

HANDSET CORD FLEXING FATIGUE TESTER
CNS-10869
During test, the specimen, which is in electrifying, will be stretched reciprocally by pneumatic driven until the current shut off or the preset numbers are achieved, then detect its damaged portion or flex times.

Specimen volume :5 sets
Flex space:300∼1500㎜
Flex speed:10∼30cpm
Counter:electronic type 6 digits

JIA-D15information

PLUG PINS ABRASION TESTER
IEC-884-1
Apparatus for abrasion test on insulating sleeves of plug pins.

Load weight:4N
Steel wire:O1㎜
Test speed:5∼10㎜(adjustable)
Counter:electronic type 6 digits

JIA-D16information

LOW TEMPERATURE IMPACT TESTER
IEC-884-1
Apparatus for impact test at low temperature.

Distance:10㎝
Hammer:∮20㎜
Failing weight:1000±2g

JIA-D17information

SCOKET OUTLETS PRESSURE TESTER
IEC-884-1
Apparatus for pressure test on plugsand portable socket outlets.

Load weight:20N
Distance:50㎜

JIA-D18information

CORD ANCHCRAGE TESTER IEC-884-1
Apparatus for testing the cord retention

Load weight:50、60、80、100N
Test speed:60cpm
Counter:electronic type 6 digits

JIA-D19information

COMPRESSION AND DEFORMATION TESTER
IEC-884-1
Apparatus for compression test.

Load weight:300N
Test law:Lift press 1 min, right press 1 min

JIA-D20information

PLUG TUMBLING BARRELTESTER
IEC-884-1
Cut off the cord with 100㎜ behind plug as being test specimen, put it into tumbling barrel, then preset the the tumbling, then check the damaged degree after test specimen being dropped and impacted continually.

Tumbling speed:5rpm（drop 10 times/min）
Counter:electronic type 6 digits

JIA- E10information

CORD INSULATOR THICKNESS GAUGE
UL-62、1581
This gauge is specially designed to measurecord insulator's thickness.

Measuring range:0.01∼10㎜
Load:10、25、85gf
Upper clamp:W8XT1㎜
Lower clamp:O0.4、0.6、0.8、1㎜