RUBBERS、PLASTICS、FOOTWEAR、LEATHERS TESTING MACHINES

1 2 3 4　NEXT UP 

JIA-APS1000information

AUTO-PNEUMATIC CUTTER PRESS
It's actuated by pneumatic source to take the various specimen for testing.

Capacity:1000Kgf
Required air:6Kg/cm2
Work desk of Max high:320mm
Test area:250X250mm

JIA-909information

MANUAL MOLDING TEST PRESS
GB-6038
It's operated by manual and for preparing test specimen from raw material.

Pressure source: jack
Capacity:10，30，50ton (optinal)
Temp.:room temp.∼300℃
Electronic timer:999hr-min-sec

JIA-909Ainformation

HYDRAUIC MOLDING TEST PRESS
This machine is actuated by motonized hydraulic system and for preparing test specimen from raw materials.

Pressure source:oil pressure system
Capacity:10，30，50ton (optinal)
Temp.:room temp.∼300℃
Electronic timer:999hr-min-sec

JIA-910information

SAFETY SHOES IMPACT TESTER
CNS-6863
Put the safety shoe under the impact site, check the damage and or warp of it after hit by hammer from specified height.

Hammer weight:20㎏
Angle of hammer knife edge:90°R3㎜
Drop height:120、300、450㎜

JIA-911Ainformation

FOAM RUBBER HARDNESS TESTER
JIS-K6382
Compress the specimen to 25％ of the original thickness for 20sec and divide the load by specimen's area to get its compression hardness.

Specimen:50X50X25㎜ （WXDXH）
Capactity:100Kg
Resolution:1/10000
Compressing distance:‾200，with hole (‾6, pitch 19㎜)

JIA-911Binformation

FOAM RUBBER HARDNESS TESTER
JIS-K6382
Compress the specimen to 25％ of the original thickness for 20sec and divide the load by specimen's area to get its compression hardness.

Specimen:50X50X25㎜ （WXDXH）
Capacity:30Kg
Compressing distance:0.01∼20㎜or optional
Compressing distance:‾200，with hole (‾6, pitch 19㎜)

JIA-911Cinformation

FOAM RUBBER RECIPROCATING COMPRESSION TESTER
Compress the specimen(foam material) to measure its permanent deformanent ratio.

Specimen:50X50X20㎜ （WXDXH）
Compressing speed:60cpm
Compressing distance:10∼100㎜ ( adjustable )
Counter:6 figures LCD

JIA-912information

DROUP BALL IMPACT TESTER
JIS-K6745
The striker with a definite weight drop freely from specified height to strike specimen for judging its quality.

Drop height :2M or specified
Control method of drop ball:By soienoid (VDC)
Weight of steel ball:112,198,225,357　　　　533,1041,2280g (optional

JIA-913Ainformation

IMPACT RESILIENCE TESTER
JIS-K6301
To test the bouncing resilience of vulcanized rubber.

Specimen: ‾28.68∼29㎜，T12.7㎜ Scale's horieontal length:L625,R2000㎜Scale's vertical height:100㎜（in vertical site）Drop height:100㎜（vertical）Iron Bar:‾12.7㎜,L356㎜,R6.35㎜, weight350g

JIA-913Binformation

RESILIOMETER ASTM-D2632
TThis machine is to test the resilience of rubber by vertical rebound

Drop height:400mm
Plunger weight:28g
Specimen thickness:12.5mm

JIA-914A IZOAinformation
IMPACT TESTER
ISO-180

IMPACT TESTER
ISO-180
Measure the amount of energy Measure the amount of energy absorbed by rigid plastic after impacted at a certain angle by specified weight to judge its toughness.

Capacity:30，50，150Kg-cm (optional)
Impact speed :3.4 m/s
Test angle:150°

JIA-914B CHARinformation

IMPACT TESTER
ISO-180
Measure the amount of energy absorbed by rigid plastic after impacted at a certain angle by specified weight to judge its toughness.

Capacity:30，50，150Kg-cm (optional)
Impact speed :3.4 m/s
Test angle:150°

Pendulum Impact Tester

Capacity:10Kg (optional)

Test angle:6 ° 11 ° 20 °

Method of Test for Floor Slippriness (Pendulun Type)

Capacity:3.8 (optional)
Impact speed :2.5 m/s
Test angle 70°

JIA-915information

COMPRESSION AND DEFORMATION TESTER
ASTM-D395
Specially test rubber in static compression under a certain temperature＆time period.

Compressing ratio:40﹪、30﹪、25﹪、20﹪
Supporter thickness:7.62、8.89、9.52、10.16㎜

JIA-916information

DUPON IMPACT TESTER JIS-K5400
Put the coated specimen under the impact site, check the damage and or warp of it after hit by hammer from specified height.

Drop height:50∼500㎜Interval 50㎜
Hammer:300、500、1000g
Impact head radius:1/2",1/4",3/16",1/8",1/16"

JIA-917information

ELECTRIC FURINACE
Be used in material's heat treatment, resolution, reaction of high temperature and ash analysis.

Interior:10X20X10㎝ 15X30X10㎝ 20X40X15㎝ (optinal)
Temp. range:400∼1100℃

JIA-918information

DRYING OVEN
Dry, bake and preheat various materials or specimen. By means of hot-air circulation, heat and temp. distribution are unform.

Model:S、M、L
Interior:30X30X35、40X40X45 50X50X60㎝ (optional)
Temp.:room temp.∼200℃OR 300℃