JIA-624information      
PLUG STATIC PULL TESTER
This machine is suitable to test load strength test of the blades, terminals and insulator of power-suppy cords.

Table speed:530±5㎜/min
Load:(5lb、10lb、15lb)x6
Timer:6 figures (H.M.S adjustable)
Test volume：6 PCS

JIA-625information      
SPARK TESTER
Apply certain voltage between conductor and electrode for a certain time to test the endurance ability of that valtage, in the meantime, the circuit indicates position of pin hole and counts its number.

Capacity:300VA，500VA (optional)
Electric length:600㎜

JIA-636information      
SURFACE MARKING TESTER
UL-1581、1690
It's professional in testing detect the durability of printing on the cord, cable and wire.

Rubbing hamerweight:450±5g
Rubbing speed:10cpm
Rubbing:100㎜
Counter:electronic type 6 digits

JIA-927Binformation      
PLUG BALL PRESSURE TESTER
It's used for measuring the heat-endurance and pressure resistance of the cord, place specimen in the chamber at 100℃ under a specified load to check its depth of concavity, it will be qualified, if the depth is within 2㎜.

Temp. range:room temp.～200℃
Pressed weight:20N
Radius of ball end:R2.5㎜
Dimension:40X40X45㎝

JIA-927Uinformation      
CONVECTION AND VENTILATION AGING OVEN
This tester is designed to test rubber ＆ plastic specimens of cord''s inslator ＆ jacket.The tensile strength, elongation and hardness of dumbbell specimens before/after aging can be compared.

Interior:60X60X60㎝
Air-change rate:1～200times/hr (adjustable)
Temp.range:room temp.～300℃
Specimen's rotary disk:three layers, three circles per layer

JIA-927Winformation      
PLUG CONSTANT TEMPERATURE HOISTING TESTER
This machine test the displacement speed of the blades of cord which is placed into the chamber at a constant temp. and with a specified load.

Temp. range:room temp.～200℃
Load:10LBX12
interior:50X50X60㎝
Timer:0～6hr

JIA-929information      
OIL BATH TESTER
GB-1690
Specially test the heat-endurance oiliness of rubber products such as oil seal, oil-protection coil.

Temp. range:room temp.～300℃
Test cup:¯38X300㎜X6 sets
Test bath:20x20x30㎝
Mixing motor40W

JIA-804information      
HANDSET CORD FLEXING FATIGUE TESTER
CNS-10869
During test, the specimen, which is in electrifying, will be stretched reciprocally by pneumatic driven until the current shut off or the preset numbers are achieved, then detect its damaged portion or flex times.

Specimen volume :5 sets
Flex space:300～1500㎜
Flex speed:10～30cpm
Counter:electronic type 6 digits

JIA-D15information      
PLUG PINS ABRASION TESTER
IEC-884-1
Apparatus for abrasion test on insulating sleeves of plug pins.

Load weight:4N
Steel wire:O1㎜
Test speed:5～10㎜(adjustable)
Counter:electronic type 6 digits

JIA-D16information    Animation   
LOW TEMPERATURE IMPACT TESTER
IEC-884-1
Apparatus for impact test at low temperature.

Distance:10㎝
Hammer:∮20㎜
Failing weight:1000±2g